
Washer not draining
Standing water in the washer
The cycle ended and the tub is still full. Bi-State Appliance Service diagnoses washers that will not drain.
The first visit is a diagnostic: $150 + tax. If you proceed with the repair, the diagnostic is applied toward the repair.
What you can check safely
Look at the drain hose
The hose from the washer to the standpipe or laundry sink should not be kinked. Do not open the pump.
Do not keep restarting a full tub
Another fill on top of standing water spills on the floor. Leave it and call.
Front load or top load, same rule
Both can fail to drain. Note which you have, and any code on the display.
When to call
Call Bi-State Appliance Service when water is still in the tub after the hose is straight. Scoop out what you safely can before the visit if it is about to overflow.
Prefer to talk? 201-835-9187. The first visit is a diagnostic: $150 + tax. If you proceed with the repair, the diagnostic is applied toward the repair.
Frequently asked questions
Why won't my washer drain?
A kinked hose, a clogged pump, or a failed drain pump are common. Bi-State Appliance Service tests the drain on a diagnostic instead of guessing.
Can I run another cycle to force it out?
No. A second fill on standing water usually overflows. Book a diagnostic.
How much is the diagnostic if the washer will not drain?
The first visit is a diagnostic: $150 + tax. If you proceed with the repair, the diagnostic is applied toward the repair.
